APPLICATION EXAMPLES
All Pedestal supports are designed to simplify the installation of raised flooring as much as possible. There is no need for accessories nor additional elements to lay the pedestals: it is as easy as breaking the the pre-cut tabs to adapt the head to different application needs.
As shown in example 3 below, for the installation in the corner wall all four tabs on the head must be removed to make it flat. However, as example 2 shows, against the wall only two tabs must be removed to allow the pedestal to support two perimeter plates.
POSSIBILITY OF CUTTING THE BASE OF THE SUPPORTS
The base of the supports is pre-cut to be easily trimmed when the two pedestals' areas are restricted because of close distances.
The pedestal's base can be easily cut.
